>>931547 looks like you burned an smd component on the other side of the board. It's a bit hard to replace and not worth the effort. But if you can find if and have the willpower and steady hands of an owl eye surgeon, yeah you could fix it.
Need help. The only thing that seems obviously fucked up is the melted black plastic on the coil. This is the circuit board from a Black and Decker BNA17 minifridge. My girlfriend said it just stopped working one day and I want to see if I can fix it.
>>931526 Inductors / transformers don't just burn out by themselves. They do burn our but something else is the cause, like a short somewhere. Also it's a pretty day picture and form here the coil looks like it might not be damaged just china glued (the black stuff the use for smd chips) Anyhow before you replace it check the rest of the board for shorts.
What sort of background reading would I need? I'm good with OOP fundamentals and soldering. Poor at reading schematics. Good with deduction and logic flow. Never built anything robotic. Love working out of daw's and have a firm grasp on midi. Thoughts? Any good books or reference manuals related to building this project would be appreciated.
Hey, so I got one of the walls in my apartment soundproofed. The people who did it were a company but I am not sure they did it right. Here's why. I got some foam like the one in the picture and put it on the whole surface of the wall. Thing is the people who did the work put the foam with the creases facing the wall and over that a layer of acoustic rigips. I want to know whether having the creases facing the wall and having a layer of rigips over it does anything or it's pretty much useless. thanks
Did the company politely explain that acoustic foam is not for soundproofing, and only installed it after you insisted that you knew better? That might explain why they stapled it to your wall haphazardly, they figured you wouldn't care.
hey guys,i got a question for yall.i live in an old house (60 - 70 years old)the old particle board lower cabinets are falling apart and have been for a while.we keep a clean house/kitchen but the cabinet problem is so bad that i am having a hard time keeping the kitchen roach problem down,as i pretty sure that they are consuming the glue that is in the particle board.the point is,i am going to have to replace these lower cabinets and counter top.i live on a very low fixed income so i am going to have to do this myself but my diy skills are sub par to put in mildly.i can read... Comment too long. Click here to view the full text.
>>931397 > Which is absolutely insane Tends to be the way, they are high tolerance, precision made devices that need to take a hell of a beating, and because hydraulics tend to be messy, complex systems, not many people use them unless literally nothing else will do the job. Low demand = Smaller production runs = Premium pricing.
> I was thinking maybe mod some syringes with small tubes and an air compressor. So the hydraulics become pneumatics.
I've... Comment too long. Click here to view the full text.
Hello dear people of /dyi/ first post here and I have some question for ya. I'm planning to build a Bass Cabinet with a 15" driver and 2 10" or 12". I was wondering if someone here could give me some advices on wich speaker chose. It needs to equal the power of the one of my guitarist, based on my estimation, he is at 106dB. Any advice? Thank you!
>>931379 >talkbass >good information Nah I don't think so.
Trash talk aside, speaker choice doesn't matter too much if you don't have a power amp section that'll push them. Generally people say the higher the limit is the less efficient a speaker is. So, a 75w peak speaker will be less efficient(so not as loud) as a speaker with a peak of 50w.
There's no definitive answer on this, because it all comes down to how an individual... Comment too long. Click here to view the full text.
Alright /diy/, I was Googling how to make your own internet connection, and this was the first thing to pop up. Some Brit farmer made pic related for himself.
Is it really that easy? A 4G reciever, a battery, a solar charger, some water proof toolboxes, some cheap lumber, and fiber optic cables? It honestly seems too easy, like I'm missing something. Help me out, /diy/.
>>931365 >that easy Like $180/month for 4g service? I guess that's easy ?
All that shit was necessary. He could have just got an antenna for his 4g pack and put a nice antenna on his roof.
That tower of fuck he made needs some guy wires because there is no way those thin pieces of wood can support all that shit.
Better diy would be a wokfi relay/network of people that want internet going back I to town until you get within range of a fiber build out and paying LOD fees... Comment too long. Click here to view the full text.
>>931365 Will work, however to get that 4G with decent data limit will be expensive. And routing that 4G to fiber might not be that easy, also have to get back from fiber to normal when in house. Still, very feasible. But hey, they also sell 4G receivers that output normal ethernet cable, so you could make it even easier.
i have the urge to make soulless automatons that crawl across my desk.... how would i go about making gears and such along with i don't know a reasonably sized drill press to drill out holes and forming frames for them...
Hey /diy/ I need a tiny bit of advice from you guys for a simple project
I'm buying the attached desk for my room soon but I don't really want the clear glass. My current desk is black glass, and I'm really fond of that.
How can I make this glass look like black glass? Upon closer examination of my current desk, the glass isn't actually black, the underside just has a thin black sticker under it, and that works pretty well apparently.
I'm wondering, can I just buy some Matte Black Spray Paint, some masking tape (so the edges... Comment too long. Click here to view the full text.
All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.
This is a 4chan archive - all of the content originated from them. If you need IP information for a Poster - you need to contact them. This website shows only archived content.
If a post contains personal/copyrighted/illegal content you can contact me at firstname.lastname@example.org with that post and thread number and it will be removed as soon as possible.