Quick dumb question for you guys, /g/ was no help, so i guess qtdntoa thread. I found this wireless charger for my galaxy s10.5, but I want to still be able to plug other things into the usb port. My cable soldering chi is strong, is there a plug I can swap out on it that has a female port on the back to allow things to plug into the tab through it, like a bypass or something? Charger is here:
>>944370 just make a microusb splitter with 1 male and 2 female ends. only tie the positive and negative from one (the charg port) into the bundle.
Or you could remove the micro usb from the charging case, and then drill a hole in the side of your phone.. find a filtered spot on the 5v input, and find a ground and tap into them and just wire your case directly to your phone leaving the usb port completely free.
or you could stop being a hipster faggot and charge your phone like a normal person.
Im sure one... Comment too long. Click here to view the full text.
I'm trying to put together a DIY version of the Dune board game made by Ilya. I want to paint wooden tokens and stick a vinyl sticker to make the pieces. The plan would be to apply to the wooden disks, in this order:
However, experimenting beforehand on a piece of wood, I found that the piece remained sticky/tacky to the touch, even after 2 weeks of drying in a fairly dry weather. I didn't... Comment too long. Click here to view the full text.
I have a question: A solar panel I have has a 5 watt output but only releases .65 volts and over 7 amps. If I hooked it up it a converter that has a 5 volt input, would the converter still work? I ask this because with 5 watts you could have a 5 volt 1 amp output. I apologize if seems like im making no sense.
what can i add to carpet to make it more like hardwood/floor?
i want to teach myself how to dance. the place that im living in right now (renting, so i cant just replace the carpet with hardwood) has a nice basement where i can teach myself how to dance. problem is, the floor is carpet which is something that's slippery compared to concrete or hardwood when wearing shoes.
so what can i put on top of carpet to make it more like hardwood or concrete? i know i cant just assemble some small patch of hardwood and put it on the floor, because that would end up sliding... Comment too long. Click here to view the full text.
I have a basic understanding of electricity but need some help. I am purchasing some solar cells that each have 2.8 watt, .5 volt output. What could I do to change that to 5 volt 1 amp? This is a project for making a solar powered USB charger.
I have an AK platform bayonet, and the metal is fucking hard. Apparently a normal knife sharpener won't work so is there any other household way of effectively sharpening this thing without ruining it?
So I just started a new job at a plant that makes seals, similar to pic related. Even though I'm new, I've been asked to sit in on a meeting regarding an issue they've had, and I think it would be nice if I had some input.
As for the issue...the production crew has recently gotten into the bad habit of mixing up seals. For exampl.e, one seal might have be 4 x 5 (ID x OD), and it'll get dumped in with a box of seals that are 100mm x 125mm. Very close but not the same. Now we're trying to find a fast and simple way for the monkeys in production... Comment too long. Click here to view the full text.
Put a feed pipe on the part hopper that is small enough to allow the smaller part through, but too big for the larger part. You could also make a goldberg-esq sorting slot, same mechanisms they use in vending machines to sort coins. Small hole followed by a large on a ramp. Small parts roll down and drop through first small hole, larger parts roll past first hole and into second large hole.
If the seals are... Comment too long. Click here to view the full text.
Stompbox thread. So, I've tried to do the Keeley Mod on the Boss DS1 and it turned out quite well for being my first 'diy pedal mod'. But for some reason, the next day it stopped working. The On/Off LED works well, but there isn't any sound coming out of it, even when it's bypassed. I suspect I might have burned something because I used a daisy chain without the adaptor to power it(I feel so stupid desu) So since this is a very common guitar pedal and a very common mod, I was wondering if you could help me identify what's wrong with the circuit.
>>944050 Oh sorry dude, first timer here . Brb gonna take pics of the board. But it isn't a fault of the things I've done by modding it. I just think I burned something in the board by using a wrong power adaptor.
I have a problem with concrete, i made some pillar foundations for fence with old cement and i think its not maturing at all, its been 2 days and is still dark i color and sandy. Is it fucked or is there still a chance for it to get hard ?
>>944034 It shouldn't take longer than a day. If it's taking a month to harden there's not enough cement in your mix. I'd only expect longer than a day or two at most if you were using flux additive or a dry mix with a large sand to cement ratio.
Proper ready mixed post-crete is hard within half an hour of pouring.
All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.
This is a 4chan archive - all of the content originated from them. If you need IP information for a Poster - you need to contact them. This website shows only archived content.
If a post contains personal/copyrighted/illegal content you can contact me at email@example.com with that post and thread number and it will be removed as soon as possible.