Garage gunsmithing edition
>prior thread not even maxed out yet
Shame and dishonor upon you.
Suggestions of short body and light suppressor a for a 300blk sbr?
The best I've found so far is a thunderbeast ultra 5/7. Sure fire socom is in the running as well.
Spike MRS-2 is a possibility but I can't find very much info on it.
I'd really like a pdw stock but i can't justify the insane price and in most cases the custom bcg. Seems like a potential money pit.
I want some guro-porn of m16-chan getting pulled apart just like in that video
That's like getting a model of the Olympic.
I'm going to try to get my carbine length MOE on my pistol length 8.5" 300BO upper because I don't have another hand guard now. Low profile gas block, and I think ima have to nigger rig some way to keep the retainer ring on... Maybe this won't work.
Anyone got suggestions for hand guards for a 8.5" barrel?
nice, i was gonna do the same exact edition but i was actually gonna wait for the other one to die first.
those tamiya kits aren't too common, and that's the one i found
I got my S3G and I've shot about 500 rounds with it now, and I'm not sure if it's right...the trigger pull is definitely lighter (with the light spring supplied), but it's pretty mushy, has some travel to it once the (minimal) per travel has been taken up, and fires.
The generic PSA LPK trigger I think was actually better; it has about the same take up, but breaks much crisper.
Perhaps I'm describing the difference between a single vs two stage...but I didn't expect it to be this mushy.
Wat do? I want a light trigger with minimal take up, and a crisp break.
I don't have anything to contribute, so here's a picture of some magazines.
Well. I guess I'm a retard then.
I guess so. I wonder if they'll do tradesies.
Yeah, this whole SBR and suppressor shit ain't cheap, that's for sure. I've got an Omega in jail right now.
Now this is my kinda thread
I desperately need to get a good vice.
test targets for a .308 tikka
I wish I could have a place like this with all my ammo and shit just out in the open to be taken in. As such though my roommates don't believe in security and literally lost the house key, so the place is always unlocked and I have to keep all my shit hidden in secret caches unless I'm actively using it.
wuh wuh wuhthafuck are they doing to that gas tube and who is this guy?
I like to think of it as being able to watch an unhinged man slowly start to descend further into delirium.
Worse still, both my roommates are hasguns but they never shoot. The girl is even hella hot and she owns an AR but won't even take it out and shoot it when I offer to take her.
I feel sorry for her AR, it lives a boring existence as a perpetual safe queen. I want to liberate it.
If you are going to be shooting subs, they do better in high volume cans and not shorty ones. Shorty ones are good for high velocity where you are going to get a sonic crack anyway.
So my advice is look for a can with a good internal volume.
Thats bretty good.
I used little pictures frame white nail for gas tube pin and again those cut to size for selector spring because i sacrificed section of that spring for it to become new super extractor spring for grillgun that came in repair and guy want me fix it ASAP.
Thanks for answering.
Well that's a pretty shitty thing to.
I deliberately emphasized that I was hasguns in my craigslist posting for housing so that I could ensure the people I lived with would be of the proper mindset.
-midwest mlok to bipod mount
-dual QD endplate
-QD loops pairs
-sexy chink made adm imitating scope mount
-New replacement Anderson upper from Anderson
Hurry up and arrive.
Hell, I even called the CFO yesterday and they didn't inform me to turn my guns in.
>not 1:10 scale
Im really liking hk mag so far i hope new Anderson upper will accept them.
(Im not actually broke clock in IRL ya know)
S M H. T B H. F A M
(I'm just a clock that lack microphone input device)
IN im thinking of cutting my front sight and getting a new rail. thats sorta gunsmithy
the context is to trigger people, that gas tube is $10 it doesn't actually matter.
well, now you don't have to worry about that bastard cock blocking you ever again.
grieving pussy is great pussy, now go comfort her and fill that hole she has and not the one in her heart.
that fucking scope oh god what are you doing nigger
Once again guises i SAY DONT FUCKING HAMMER ROLL PIN IN SQUEEZE IT IN USE THE GUNSMITH METHOD.
USE BIG PLIERS WITH LOCKING CHANNELS AND TAPE OVER THE TEETHS OVER AND OVER. GO SLOW AND CAREFULLY.
yeah, was a shitty propaganda campaign for him.
whatever I give it a year or two before the Libs start cracking down on handguns.
or just one mass shooting with muh children.
enough time for me to renovate my house and sell it if/when things go south.
Just so long as you get it eventually, senpai
I was going to get an A1 grip for my carbine. I think I'll forego that now.
you can't be that poor. I'm poor and I can still buy a proper fucking scope mount
U mean scope mount.
Doesn't matter its temporary until new mount arrives and it held zero despite scope have been bumped, scruff on windage turrent cap can be seen on two of pictures. The mount pair came off old $500doll hairdoo scope and is forged steel, its very heavy for scope mount. Burris have god teir warranty i could literally remove the scope and use it to drive in nails and if it break i just send it in it will be repaired or new one will be sned to me and shipping on their dime if i remember right.
The mount are also sufficiently spaced, i trust it sufficiently to take it out for hunt.
I am dead-fucking-serious when I say that you get more incomprehensible as the days go on. Is your brain deteriorating?
I also have a higher red dot mount on the way
I believe I will be cowitnessing now
Pic retake n repost pls.
Appear to have some damages? If you did that with squeeze in method you should...
Give me your rifle and allow me to assist you in your suicide.
Damn shame! Your loss.
You only just now noticed? I been having that a1 for quite awhile.
Be advised theres multiple types of a1 grips get one thats fat and speckled. So beautiful indeed.
> doesnt see "until new scope mount arrives"
S m h. T b h. F a m
Let me rephrase!
Mount is secure and sufficiently rigid. To degree that it held zero after receiving bump, which the scuff can be seen in two of pictures i posted. The location of scruff is on windage turrent cap on the scope you dum dum. I trust its current mount configuration to take it for hunt.
You have shitty reading comprehension. Sorry. What happened to you you have IQ below 70 or something?
So dum dum you migh suddenly transform into dum dum pop!
That also apply to you.
s m h. T b h. F a m
>What happened to you you have IQ below 70 or something?
>So dum dum you migh suddenly transform into dum dum pop!
> why yo using big word and sentence all weird ya try makin me look like da fool? Yo aint tryin to hustling me i got glawk forty with dem beams imma pop your fool ass
Easier to understand than
> why do you type improper sentences trying to pit strain on my reading comprehensive? You arent trying to make me feel and look dumb to trick me are you? I have glock with laser i aint missing your ass.
Gr8 b8 m8
Fucking niggerlover i swear
Out with the Elcan, in with my unicorn scope. New limited production run 2.5-10x24 Mil/Mil ZS.
Shitty indoor picture for excited midnight mounting.
The glass/coatings are great for the price, SCR reticle is awesome, but sadly the new T5Xi series have been having some tracking issues with the new turrets. The older M5X series are still solid if a bit dated on their coatings.
Specifically which model of theirs have you been considering?
I watched the big thread on SH for a few months through the growing pains and replacements that were still nto tracking. If they are fixed up now they are at an awesome price point for what you get.
CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM CUM
Like that need mentioning.
It doesnt negatively affect burris's product quality nor customer service. Burris continues receive praise in quality and excellent customer service.
It's ok, problem is people want to compare it to Earthbound
Anon I'm sorry no one has told you yet, but you were a faggot before undertale was released...
All buis with standard height are interchangeable. Unlesse xtra high or low like hk 416 sights for example.
If you mean as in look good i would say no.
Matech and mbus are both standard height.
Why, yes it is, anon! But you gotta be able to post your own ARs to supplement the shitposting...
Here's the Green Meanie! Drunken picture taking in piss poor lighting never looked so good!
It's actually a wonderful shade of OD green with me fucking with the camera until I could get something to work.
It's this with a 16" instead of the 10 barrel.
Just how accurate and reliable is the H&K MR308?
>hurr AR in 308
or actually not that bad?
Also it's priced reasonably compared to other high-end 308 semiautos here; I read it's like six grand in the US or something.
I don't feel like posting my NY neutered AR
So here's my friend's dad's AR instead.
He's a Port Authority officer
Stop shitting up the thread with your unintelligible fuck holing, christ, just fuck off.
First time builder here. Have a couple questions.
>mlok or keymod
What made you go with one over the other?
What's a good 14.5 midlength barrel preferably for $250 or less? i had been looking at faxon but all I could find were carbine gassed 14.5.
What grips are good? I'm probably going to go with a magpul or B5 stock but I can't decide what grip I want. I have an A2 from my LPK, should I just stick with that until I find one I really like?
Don't you mean audio input?
And yeah, I used to use my hgay magazines a lot, but they're so goddamn thick. They wouldnt fit together in a double magazine pouch, and in a milspec GI dm pouch, won't even fit with GI magazine. My non standard RACK pouches took them however.
Also harder to load than pmags and gis.
>mlok or keymod
Dicks vs slots, the choice is yours.
I love my hogue grip but most people aren't cool enough to use one, bcm and magpul are very popular. just try some, they're cheap.
Dude, it's like 10 dollars. It took me about 14 hours for the 2 runs I needed for best ending.
It's left me so emotionally drained I don't even think I'll have enough hype when fallout 4 comes out.
And whats amazing is that all its popularity is from word of mouth, and it deserves every single word.
If I were to get into a balls to the wall political debate over games being a form or art, this game would be the first I'd point out.
Get on it before it gets spoiled for you.
I'm thinking of building a 14.5 7.62x39 AR upper with a pinned muzzle brake for suppressor goodness.
problem with this is that I can't find a good muzzle break/suppressor adapter.
Anybody seen something or are using something they'd recommend?
Or is there someplace I can look?
What's a good set of flip up sights if I don't plan on getting an optic for a few months after finishing the rifle (mainly because I'm poor and want a case or two of Wolf Gold and a chest rig first
you can do rails on an A2. See pic related, the magpul poly rails fit in the a2 holes, or you can drill holes wherever in the side of the guards and they fit
Fn makes barrels for lots of companies, they make them to different specs and different levels of quality.
Noveske and psa both get their barrels from FN and they both get the "m249 machine gun steel" barrels but i'd bet money on the fact that the ones for Noveske have better qc and different specs.
Bcm is popular for being quality and competitively priced, i don't know much about spikes so i personally wojld choose BCM.
Can anyone tell me what's wrong with this build?
No idea what I'm doing, just trying to build a budget AR.
You didn't go with the false dissipator upper and buy a set of A1 hand guards.
Wait for the PSA premium upper to go on sale.
Its like 30 dollars more but higher quality.
It will be a carbine gas system though.
To compensate for this, grab a DPMS solid gas ring, they're 5 dollars and last far longer than most if any other gas rings I've yet to see, most average 10K rounds but you do need to do a good bit of breaking in to make sure it works right.
Second, military surplus iron sights can be found on Ebay for the same price as a Magpul, if not cheaper. I bought a brand new, still in packaging and oil MaTech for 50 dollars, free shipping. The one the Marines use is also the same price, don't know the name though, but they're both a lot better than magpul sights.
Otherwise, the PSA premium cheapo build is a great starter.
Great rifle to use for plinking and should shit moderately hit the fan, if you make the little investments in it. Good for you to also buy gunsmithing tools to start building uppers as well.
that thing is an abortion and every second it lives is absolute agony
you should consider suicide.
>You can't put A1 furniture on ANYTHING but an autistically build A1 clone.
How about you go fuck yourself with a cactus? I like it and shoot better when the rifle has that stock and hand guard on it, that's all that matters.
Make no mistake, I've been very wary about the guns and the so called customization.
If I wasn't working on a half a dozen other things including drafting something that I'd hesitate to call the groundwork of a game for my Coding/Programming class for my Engineering major, I'd probably model non shit versions of every gun, taking heavy inspiration from NV and design the swappable parts as well, and throw the mod on steam as a possible resume reference for my ability to use 3d modeling software, as well as program.
But there are a number of things that Fallout 4 seems to be doing right, including the mass acceptance of mods that the community will no doubt take part of to no end, considering people are still making mods for NV.
>including the mass acceptance of mods that the community will no doubt take part of to no end
So that's what's *right* with Bethesda games?
Releasing half-assed shit at best and relying on the community to unfuck them?
Bethesda took a big, smelly dump on the Fallout legacy with FO3. And just when FNV is about done with the damage control, they rush in with a fresh load of lowest common denominator plebshit.
Just ignore him. I don't know if you've seen him around lately but he goes away if you just ignore him.
The AI furniture is fine though. Like the stock but I prefer the magpul version, if only they both had a compartment so I could put a cleaning kit or spare bolt in there.
Maybe I'm just uncultured swine. But I don't see the big deal with Geisselle triggers....or any super duper neato trigger for that matter.
The milspecs have little travel and break crisp in my experience. Maybe I'm just an idiot?
Thanks for the advice.
Is this the upper you're talking about? http://palmettostatearmory.com/psa-16-mid-length-cmv-cl-stripped-upper-without-bcg-or-charging-handle.html
I'll take a look on ebay for a rear sight.
I'm not really sure about the differences of gas systems other than different sizes are used for different things
I shot a few hundred rounds through a M4 in basic and ended up qualifying 32/40(with an Aimpoint M68 cco) on the 50-300yd pop ups, but I'm still relatively new to firearms.
All I really want this for is for fun/plinking and to get some shooting time in since I'm a nasty girl and budget cuts don't allow much funs training after OSUT.
>he goes away
do you have any idea where you are?
The scope is a joke $50 toy to go with the solvent trap for shits and giggles, what's wrong with it aside from those?
The LOP of the A1 stock just speaks to me, and the triangle handguards make shooting way easier in every position.
Are you just nitpicking just because?
I think its a nice gesture but its not the only reason why I'm looking forward.
And hadn't bethesda came along and did something with the half assed top down formula that FO followed because of hardware constraints, the series would have been dead.
The fact that they're trying to do new things with the concept of "The hero of the waste" idea means they're trying. They want people to remember the series, they want players to craft their own experiences, the fact that they're being accepting of mods on an entirely new level means they want to work with the community in a day and age where many other triple A devs would rather DRM lock out players.
I'm more hyped about what the new game will do to the industry than what it will actually have to offer. Because then again, I don't hate fucking legoes and throw tantrums because they don't give me free blow jobs when they offer build kits.
nothing besides being asthetically unpleasing, im just autistic
who made the scope, and does it hold zero at all?
Its listed at 280 but like I said, PSA has daily sails that drop prices like a god damn brick in the ocean.
The differences in gas systems are minor though.
Many say carbine is harsher than mid length on the gas rings that let the bolt function, this is minorly true but not entirely. Carbine also works well on shorter barrels while mid length for longer. In any case for any AR you build, replacing the gas rings is a very good idea.
Here's a cool integrally suppressed upper, although it's kinda sparse on NFA details. Might get one if the Hearing Protection Act passes. A shame that it's KeyMod though.
he's one of those entitled dickholes who will never be happy with anything new
same thing with the star wars battlefront crowd
they're not making the game he feels he 'deserves'
if it can hold my attention for multiple hours, it's a good game, it's that simple
>nothing besides being asthetically unpleasing
Totally understandable, I hate it myself, it's currently in pieces while I wait on a new lower. I fucking hate the Anderson arms lower because of the 9000% gay trigger guard that's part of the lower.
Gonna make an appleseed style rifle for getting better with irons.
>im just autistic
You also misspelled aesthetically.
>who made the scope, and does it hold zero at all?
It's one of those shitty Barska $45 scopes meant to imitate the old 70's optics. It does hold zero (For me, I left it in a hard case when not shooting or cleaning, and I'm sure the QC is garbage for them), but it doesn't matter because the cross hairs were not aligned properly and you can't rotate the scope because of how it's built.
It's just for shits and giggles, like this upper I was fucking around with. (On that same fucking Anderson lower. Seriously fuck those things)
I don't build for tacticool gucci reasons, I do it because I can and it's fun. Like playing with lego's and using all the colors to build the house instead of the right ones for siding/roof/etc...
>You also misspelled aesthetically
>missed an e
usually google chrome holds my hand and tells me, but i guess i wasn't paying attention
it would be nice to find one of the original colt scopes.
>it would be nice to find one of the original colt scopes.
Fuck that shit, get a retro Aimpoint from the 80's and reenact all your OG Special Forces fantasies.
The colt 4x20 scopes used to be pretty available, then every swinging dick decided they NEEDED a retro AR15 (Okay, they are the best AR, so I guess I understand) and they dried up.
got my RMA'd Strikefire on the raifu ft. my new plate carrier
>What the fuck is the left part supposed to be?
Take a gander.
>It's not a pixelated heart that's for sure
But it is.
That said, I'm having another one made with the soul icon from the game and, hopefully, pixelated text.
>reenact all your OG Special Forces fantasies
You'd need one of these for that.
I really want a Colt 4x20, but I've accepted the fact that that's probably not going to happen.
> Everything about it is superior.
Naw, but it sure does look nifty.
>They do come up from time to time on Ebay and auction sites.
The problem is, as mentioned, every-fucking-one wants a legit Colt optic, so getting outbid is a certainty, at least for me with my Jewery.
>The irons are superior to the A2
>The furniture is superior
>The FA instead of 3-round is superior
>The weight distribution, handling, and LOP is superior
(Yes I know it's all opinion, but dammit unless you're strapping DARPA to your quad rail the M16A1 is just the best generation IMO)
Yeah, I feel you on the jew front. Fucking sucks when shit goes popular and it instantly goes the way of the .22lr
>Are you just nitpicking just because?
I'll agree with case deflector.
But fixed stock best stock for balance.
Best 16" A1 dissipator?
Don't forget you NEED to enlarge the gas port to make it run right.
>Or you can use a mid length gas system and just mount an A1 FSB at the right length for the hand guard like PSA does.
Where did you get your A1 kit?
>Don't forget you NEED to enlarge the gas port to make it run right
no shit, the flash hider is going to need to be pinned as well, since the colt 605 is 15'' or so
>Or you can use a mid length gas system
that's pleb as fuck
and i don't remember where i got my kit
i found a colt barrel at a gun show for 180, ordered the parts kit as soon as i got home
it was about $500 i remember
>>The irons are superior to the A2
I've experienced both the A2 and A1 sights, and it was nice having both windage and elevation available to me in one place without any need for tools. Also, the A2 FSP isn't as thick.
>The furniture is superior
I agree at least in regards to the buttstock that isn't fucktardedly long and the pistol grip. Handguards, however, I have to give to the A2 by a country mile due to the brittleness of the A1's. I've gone through two lefties because their either cracked or lost a few prongs.
Other points I either agree with or find irrelevant to us as civviefags.
I would definitely suggest the Matech buis for you since they're the same ones that you'll be using in the Army. Or make friends with the armorer guys at work and give one of them a case of beer to let you steal one and skip the whole "stolen goods on ebay" bullshit.
> skip the whole "stolen goods on ebay" bullshit.
Why on earth would you want to miss out on not only the satisfaction of jewing a company into oblivion, but also the opportunity to send Barfcom into a 'tard rage?
You should be snorting Dillo Dust off Mark's huge cock for what he's done for the gun community.
He's made mountains, you've just shitposted and fucked your knuckle.
>Not using based mk9000mod1 with sierra TMK rounds.
Its like you dont even want to reach out to a full parsec.
it has its place.
it'd be really good on like a AR10 or a DMR with a fixed stock just to make transporting easier.
Mlok>keymod full stop
keymod only have one advantage the mounts dont protrude into handguard whichs better for suppessor being used under handguard.
Mlok have everything else better.
Mlok have higher maximum torque and isnt unidirection tightening.
For laser and flashlights keymod get tight with every recoil, its ideal, no problem. But for bipod, handguard cover grip, and afg/vfg its really straining the handguard and may loosen over round count.
No i mean microphone due to microphone is "hearing" your voice. Audio is sound data input.
Good question f a m.
(You can also ask me techie question i can help.)
About hk mag i can fit them into gi pounch but just not all three hk in three usgi mag pounch (alice set up) i use 2 hk with one usgi. Usgi is still number one magazine for me they earned my trust. The difficulty to load is simply due to better spring tension the spring from what i see will also last longer than usgi. You havent mention how easy it is to be unloaded by rifle or pushing round out front of magazine. I can empty a hk mag by thumb under 13 seconds without injuring my thumb.
The SPRECCE is reborn, now with new x24 NF hotness in a cloudy daylight picture.
One stock I almost never see used is the LWRC Ultra Compact, I think it's only about a half inch longer than the PDW stocks and only needs it's own special buffer and tube which it comes with.
Whoa edgy it could easily be your mom whos bad one. For example your mom WANT TO HAVE BABBY and your DAD DO NOT. Your mom sabotage pregnancy protection without dad's knowledge nor agreement. Even dad and mom could have agreement to abortion in case accidental pregnancy but then your mom breach the agreement due to muh feelings or muh religion. Most if time its mom' fault (NOT APPLICABLE IF NIGGERS)
I would leave myself.
> Isn't the A1 just the fucking best M16? Everything about it is superior.
*DISAPPROVAL BABBY GRINCH STARE
A1 sights are shit compared to A2 why? A2 have quick easy elevation drum on rear for breeze changing zero for different engagement range. On A1 you have to use fucking tool to change front sight height and it will take like 3x maybe much more longer it take a2 to change elevation.
A1 furniture are more brittle and cracking/breaking prone than A2 but A1 sufficiently stronk enough indeed.
A1 is sexy like fuck indeed but for real use A2 and everything further is best.
A2 is best imo sexy fixed CH but best sights. Im not m16gey fan im retro carbine fan.
I retract my earlier statement. The A1 is the best at everything in comparison to the A2.
i dont live there but unless someone goes on a killing spree with their machine gun the government isnt going to arrest anyone in Alaska
If i plan to build a 300blk sbr with a 10.3" DD barrel, am i gonna be ok with like a PSA lower and an Anderson upper? Like will they be strong enough for the pressures of silenced fire? Haven't purchased the upper or lower yet and need recommendations.
You have to be an idiot if you think either of those laws mean anything. Remember what happened in Little Rock, Arkansas when they didn't want to let niglets into white schools? The same shit would happen if the Alaskan police arrested federal agents. The DEA had no problem raiding tons of medical marijuana farms and dispensaries up until Obama told them to stop. The ATF will do the same shit if they hear about someone cranking out machine guns.
Not the guy you replied to.
Hey, I have a question about switching barrel lengths on a single AR lower reciever.
(I am fully aware of the legal requirements to do so, so that's not what I'm interested in.)
Would it be mechanically safe to have two separate upper recievers, one with a pistol length barrel and gas tube and the other with a rifle length barrel and gas tube, and simply switch these two out on one reciever? Do I need to change buffer springs/tubes etc for mechanical purposes?
Also, would it be mechanically safe to use one bolt, bolt carrier, and charging handle to change between each upper? Will this affect accuracy drastically, or pose enough of a head spacing problem that it could result in damage to the firearm?
>on an AR
yeah deimaco lower, currently waiting on Cost so I can buy it, because MSRP is insane
and personally I'd just save up the money, I like the PEQ's more than the Elcan.
Yes they'll be fine. They're made to the same milspec as pretty much everything else.
Swap away. You're good to go. It's called a lego gun for a reason. There are no headspacing issues when everything is made to milspec. Just don't get caught owning a pistol barreled-upper and a rifle lower at the same time unless you have a dedicated pistol lower for it.
honestly man you should separate the first couple fallout games from F3 and NV you'll live a much happier life
Fundamentally they are seperate in terms of gameplay, If you want to play another fallout 1-2 go play wasteland
It's a bit of a nitpick thing, and one that you can really only feel the difference when youve experienced the platform more.
I see it as a preference thing, you arent going to see an accuracy increase unless you can already shoot as well as your rifle
you have no idea how branching dialog works do you? The ui is cleaned up so the options that would be locked behind a skill score dont show up
The character says the dialog as opposed to the npc just responding like in the previous game, its not like they removed options, they've actually written more dialog for the game than FO3