Guys I'm looking at buying this used cz p-01 for $500. Is this a decent price for the gun? Here's a couple pictures. PLZ HALP
Brand new is only maybe $50 more. I would not pay that for a used one.
I'm also thinking about buying one
Pic relate is some other faggot's gun
It's not bad, mine needed break in to be perfectly reliable (still only 1 FTE every 5 or so mags) and shit polycoat is shit.
Well the guy seems to be not willing to go any lower than $500. I've never seen a cz in a store where I live, so i just dont know how bad a deal or okay this deal is.
So is $500 not worth it on the gun? I see they range 575-625 online news
A clone will be cheaper and just as good. One of the first pistols I bought was a canik stingray c and it shit all over my best friends p01, at the time the gun was half the cost dunno what they are now but czclones are a much better value gun
but the P01 is nato approved.
>Must be able to complete the following without failure:
4000 dry firings
Operator level disassembly 1350 times with out ware or damage to components.
Complete disassembly 150 times, this is all the way down, pins, springs etc.
100% interchangability, any number of pistols randomly selected, disassembled, parts mixed and reassembled with no failures of any kind including loss of accuracy.
1.5 meter (4.9”) drop test, this is done 54 times with the pistol loaded (blank) and the hammer cocked. Dropping the pistol on the butt, the muzzle, back of the slide, sides of the gun, top of the slide, in essence, any angle that you could drop the gun from. This is done on concrete and 0 failures are allowed! A failure is the gun firing.
3meter drop (9.8”) 5 times with the pistol loaded (blank) and the hammer cocked, This is done on concrete and 0 failures are allowed! A failure is the gun firing.
After these tests are complete the gun must fire without service.
The factory contracted an independent lab to do additional testing on guns that previously passed the drop tests. These pistol were dropped an additional 352 times without failure.
The pistol must also complete an environmental conditions test:
This means cold, heat, dust/sand and mud.
The pistol must fire after being frozen for 24 hours at –35C (-36F).
The pistol must fire after being heated for 24 hours at 70C (126F)
The pistol must fire after being submerged in mud, sand and combinations including being stripped of oil then completing the sand and mud tests again.
The service life requirement from the Czech police was 15,000 rounds of +P ammo!
The pistol will exceed 30,000 rounds with ball 9mm.
The reliability requirements for the P-01 pistol are 99.8%, that’s a .2% failure rate.
This equals 20 stoppages in 10,000 rounds or 500 “Mean Rounds Between Failure” (MRBF)
During testing, the average number of stoppages was only 7 per 15,000 rounds fired, this is a .05% failure rate, a MRBF rate of 2142 rounds! Over 4 time the minimum acceptable requirement.
The U.S. Army MRBF requirement is 495 rounds for 9mm pistols with 115 grain Ball ammunition.
The P-01 is a fantastic gun. I got one as a winter carry gun and so far I have no real complaints besides the sights being sub-par
Just picked up mine this weekend. Can't wait to get out to the range.
I don't think OP is going to be dropping into a jungle and operating any time soon, a clone and extra ammo will serve him much better.
Both bow to HK :^)