RIS II is the best quad rail ever made edition
Until they come out with a ris lll
Wasn't the Lite III just the narrower version of the II that they had been putting on their pre-built rifles for a while?
MI has both FF and non-FF quadrails for around $150.
Copying from last thread
Last Round Bolt Hold Open
I know sometimes there are issues on rifles where this does not occur. I'm guessing its a gas issue?
>By rape my wallet I meant over $300
oh i assumed you were a poorfaggot fuck that would cry about anything over $50
larues are pretty great for how much they're on sale for right now
If I didn't have a teardrop FA on my A1 build it'd be retarded, and the one on the carbine adds snowflake factor and pisses off anon.
I like mine and the reviews are solid.
Well, for starters, we'd make fun of you.
>I like that rifle less since you added rear BUIS
I always found it amusing the vein popping that only having the 99051 out front caused.
It is certainly a case of diminishing returns after a certain point. The high dollar rails usually have some design feature or usage history that sets them apart, but that feature or heritage may not be worth the extra cost to everyone.
I like the KAC FF RAS honestly because of their use in service rifles. My interest in the DD RIS stems from the same aesthetic appreciation.
There are cheaper rails than the KAC that are lighter, have better mounting systems, and offer more integrated features (like QD sockets), but they don't have the pedigree I enjoy.
Given how retarded the BAFTE is and the sig brace and shockwave situation.
Does it almost seem like someone just design a full blown stock and say to the ATF it is designed to be used a certain way? I wonder if they could get by with adjustable stocks and just claim that it because people have varying lengths/sizes of forearms?
What I've seen online is basically just use trial and error. As long as your barrel/gas port/gas system aren't hilariously shit, you can usually just replace your buffer with a lighter one if you have problems with BHO.
With the cost of a shockwave (~$50) or a sig brace (~$80), the cost of an adjustable unit would drive you ever closer to the price of just getting your stamp.
I have a sig brace that my friends and I share while waiting on F1s. Outside of non-SBR states this seems like the best usage to me. For just a single rifle, skip the brace and just file for a stamp.
Im still waiting for someone to design a longer buffer tube (between carbine and rifle) with a slightly wider end with a dumb explanation.
No way they'll consider said buffer tube as a stock right?
I'm buying parts for my upper and I'm wanting a 7075 handguard. The only names I've seen so far is either Mega Arms or Hodge Defense. Does anyone know of others?
you have to notify any time you want to take it across state lines and not just with moving. It is relatively simple with just a 5320.20.
In a hurry, just slap a 16" upper on it and you can move across state lines with it in Title 1 configuration without any hassle. If it is a permanent move on short notice, just do that and file your 5320.20 and slap your short upper back on once you get it back.
Another option is perm attaching a sealed suppressor to a short barrel to meet 1" OAL. You don't need permission to transport a suppressor, and your rifle that is effectively a suppressed SBR is just a Title 1 firearm.
Alternatively, how can I enhance the fireball coming out of my muzzle without significantly increasing noise? I've seen the Degroat flash enhancer vids but they aren't very impressive and the device itself is ugly as sin.
By that logic, why even pay for the stamp? Unless you get pulled over nobody cares
Enhancing flash doesn't necessarily mean bigger explosion right? If I take off an A2 birdcage my rifle isnt louder but it is brighter.
What's the cheapest totally not a stock option that isn't shit if I'm looking to SBR eventually?
The Doublestar Dragon "flash hider" is brighter than a bare muzzle.
I don't know how often you work on your gas tube or gas block, but the main advantage dd has over other quad rails is that you can remove the rail relatively painlessly, without having to fuck around with the barrel nut.
That, or you really are ocd and like to oil the outside of your barrel.
They come in SOCOM Black, Sniper Gray, and FDE.
>That, or you really are ocd and like to oil the outside of your barrel.
This is a major reason I've been switching over to Melonited barrels from parked exterior chrome lined barrels. That little bit of extra pain in the ass after shooting in the rain solved by technology.
>could probably get this for sub $800
>add $100 BCG
>add $25 milspec charging handle
>add a free A2 birdcage
>toss on my $60 lower with my $65 LPK
>find a pistol buffer and a not a stock
I want a mod 0 but this seems like a steal.
Talk me out of it.
KAC micro BUIS would be correct for this, right? Or should I skip right to a PA micro dot until I can afford a proper optic for it?
This really needs a DD M4 Quad 12.0 and A2 stock.
>year 7 of good lord ogobonga's rise to power
>still using quad rails
Man if people with free float quads are dinosaurs then my rifle with it's ban-era muzzle, M5 RAS and C79 Elcan is a true antique.
Luckily the ban era muzzle is going away soon, machinist friend has it set up to be threaded soon. The rest is staying because I've grown fond of it over the years.
if you can lug that heavy mother fucker over here
how is that c79 for being old as fuck. I got a lead on one for 400$
>Mepro M5/Tru-Dot is the only other one that comes to mind.
Thanks! That was actually exactly what I was looking for, as it's both cheaper and solves the retarded auto-off feature on EOTechs.
>Ban era muzzle
And I thought I was the only one. At least I actually live in a ban state.
I'll somehow manage the 9.5 lb. loaded weight. Your fukkin dead kiddo.
Just from looking though
>$70 pinned gas block
>$16 gas tube
>$200 upper (only stripped DD upper I could find so I could be completely wrong)
But from the looks of it I may be able to get that upper for a little more than just the barrel and rail would cost me.
Even worse would be the collection of cast off parts that coalesced into a rifle, currently minus a barrel as that's the flattops barrel and it's waiting for a threaded H-Bar barrel to show up.
I will be the first to admit this thing is ungainly as hell and an absolute antique compared to any modern rifle but the little kid me that fell in love with the Delta Elite H-Bar in the early 90's had to have something like it.
Pictured next to the Vomit Stick, the result of buying a damaged and incomplete Bushmaster Bushmaster Assault Rifle and raiding the parts bin.
i need that shit stick in my life
The C79 feels like a box full of lead but the bastard is durable, mine has been knocked around and doesn't show any evidence of it. Mine even came from a batch slated for disposal in the mid 90's that the buyer resold instead so mine was abused long before I got it.
They have pretty piss poor eye relief but damn good glass, if it's the true C79 with the T-reticle I'd jump all over it. Just remember if the tritium is dead Elcan will keep them if you send it up to Syrupland.
Why the hell does everyone hate the magpul light mount so bad? Keeps the light bezel forward of the muzzle to reduce barrel shadow, ergonomic as tits, securely hold the light. What's the issue?
Agreed. These troglodytes with their obsolete cheese grater rails never learn.
What's the overall opinion on Ferfrans CRD Modular Muzzle Brake? It's a regular muzzle brake with a QD shroud that directs most of the blast forward when attached. I kinda want it for my SBR.
>inb4 get a suppressor
Live in Canada, can't get suppressors
I know it's heavy but it's a range toy anyways so it doesn't matter too much.
ill stick with my pistol and buy 200 bucks worth of ammo
Anyone here familiar with Surefire's more obscure stuff?
If I understand it correctly, I can take the KM1-A or B head off a V1 Vampire light and put it on a M300 to make an M300V out of it?
Also, what the fuck is the difference between KM1-A and KM1-B? The 100 mW vs. 110 mW IR output?
I'm asking because the V1 Vampire often ends up costing *less* than the spare KM1 head.
if youre an ocd autist, it will bug you
if you dont give a shit and just want to go PEW PEW PEW its great
Perpare fo number one clear answer.
Firstly most often bho failure are due to bcg not cycling fully. That is often due to insufficient gassed or wrong bufferweight/buffer spring rate combo as in too heavy and strong for the rifle.
Second most common reason is debris build up in spring channel or bolt stop channel inside receiver or worn/faulty bho spring. The magazine spring can be worn to point it cannont over come bho spring tension to move it up to stop the bolt.
Third is aftermarket part add on such as BAD lever causing problems.
Get kekstanp and waive your right to privacy. ATF can pop up and pay visit inside your house anytime they please without providing reason of suspicion or whenever.
No thank kek club.
Git your illegal nfa as protest!
faggots will tell you to pay 200 dollars to
>complete the look
>bullets wont work as well
other dumb shit like that
> Not using some form of grease to coat your barrel under the handguard as in countermeasures action for preventing rust.
Preferably graphite grease.
> Being this OCD and dumb
The NFA has been in place since 1934, that is 81 years. Could that change in our lifetime? That is certainly a possibility.
Until that happens though, I will enjoy actually owning rifles with proper stocks on them. The Government has less of a reason to come pay me a visit than they do you, Mr "I have to get stoned because school is too hard".
hallelujah! hallelujah! Fucking gospel!
*arm and hand out and do church worshipping wobbling
*close eye and facial expressions as in I am receiving something holy
*mumbling hallelujah hallelujah
I am not a stoner tho m8
Being this delusional kek that willingly give up right for mere putting mere proper stock on without breaking the law.
Why dont you just go ahead remove your leg wear and bend over so i can call gay nigger to fuck ya you fucking faggot kekshit.
>projecting this hard
kids piss you off?
What are the benefits of a 14.5" over a 16"? They worth the trouble of pinning?
Also is a 14.5 carbine gassed that bad? Because all I can find in non parkerized barrels in my price range ($200) is 14.5" carbine.
>whining about tripfag
Fucking anon whining about tripfag they are problems thread is going good questions are getting answered helpless was helped
Then here come you whining.
wait... is that considered a handgun still?
CuriousGeorge is our resident... I don't even know what to call him. Cancer? Internet tough guy? Oh, I know.
He's our resident Super Weeb. Don't bring up weeb shit or else we won't be able to get him to stop posting weeb reaction images. He loves that shit for some reason.
Well well now i learn asl and English simultaneously.
So yea. I did have alot shitty english teachers growing up.
Do you sperg out every time you see sentence start with "and" or see sentence start and end without capitalizing or period or choice of sentence ending mark?
That was a honest question pls answer... you sperg.
Neither way if you do sperg out, kill yourself, if you do not but sperg out at me, kill yourself.
Pls answer anyway, im genuinely curious which sperging you do.
I like my shockwave. It does its job. I wish it had a more aesthetically pleasing and functional cheek weld, however.
it puts a face to all this verbal diarrhea
Not really m8.
Its more like pic related.
I am not weebshit full stop
When discovering 4chan /k/ was first board i visit.
same here faggot. doesn't mean that weebshit isn't awesome.
Is that the last attempt? I think it's the best one so far - by a long shot.
Now they just need to start locking all paint away from you so that you don't fuck it up.
This is the rifle of an individual who would rather pay money for an inferior "stock" solution to just avoid paying slightly more for a stamp.
These are the v6 Camaro owners of the world. The people who buy Mickey's since "I get a lot, and it still has alcohol in it".
No amount of reasoning will convince them that there are better paths to take if only they could see past "but its cheaper and almost as good!"
Occasional cool ridiculous silly fantasy shooting webm there and BUP BUP there! thats enough dosage of weebshit for me.
But constantly mentioning muh waifu or specific characters post lewd pictures of fucking cartoon.
In high school i know a weebshit, well actually several of them and they was most cringy people i have ever met you sweat and cringe everytime they... It was a torture. I pity them but now i hate them.
There was one weebshit who's cool not a sperg he played sport and's actually my friend he wouldnt speak weebshit until other weebshit is encountered. Good guy but most weebshit arent like that.
Now let say i meet somebody new in uni and i get hint they are weebshit i already hate them until they are miraculous nonsperg retarded fedora tipping neckbeard.
> Making it about money. Despite obviously not about money its about ideology.
Look EVERYBODY a insecure kek that gave up right and now trying justify it.
>No amount of reasoning will convince them that there are better paths to take if only they could see past "but its cheaper and almost as good!"
famous last words
a bullet doesn't know how much you spent on a rifle
spend that $200 on gym membership
the only way money actually can increase your performance
I repeat thats just until the new mount arrive which should be today or within week.
Until then its in proper location for my convenient of using charging handle and being inside the eyebox. It held zero after receiving bump. If its going to be like that for forever i wouldnt sweat a drop.
New mount pic related.
>a insecure kek that gave up right and now trying justify it.
I think its quite clear that having paid my dues I have more rights with my weapons than you do. It is just about money. Are you doing anything to actually repeal the NFA other than whining on the internet?
Do you encourage brace owners to take the $100-$150 they saved on a stamp to donate those funds to the NFAFA or the Heller Foundation? Have you made any donations? I have. I spent the money, not only on myself for my stamps, but in the hope that you and everyone else will no longer have to in the future.
>I have more rights with my weapons than you do
you forgot to read this this
here is a high res pic for you
>We hold these truths to be self-evident, that all men are created equal, that they are endowed by their Creator with certain inalienable rights, that among these are life, liberty and the pursuit of happiness.
I've always like the top expert tnp patches. Pretty sure they stopped selling them. Wasn't actually planning on buying one anyway, but I think they're pretty funny.
Sexy like fuck eh?
ONLY $200 NO! *SLASH
ONLY $100 NO! *SLASH
ONLY $FORTY-TWOOOOO AND NINETY NINE!
he's not spamming shit he doesn't own
Has the paint started to chip off you can at all?
I noticed some flaking last week when i washed my ar.
Doesn't look like a Ghost Gun General is up so I'll post this here;
I'm going to head to Harbor Freight in the next few days for the stuff I need to finish my 80%.
So far I have on my list:
Ear plugs (maybe)
I'm not sure if I'll need a router, I might grab one anyway. I've read you can also use a file to finish up the pocket.
Anything else I'm missing?
I level all of my scopes by eye on the bench and its worked fine for me out to 750.
If you want to use tools though, use a small bubble level on the receiver then on the elevation turret, have the rifle slightly canted so you can line up the edge of the bubble with the marks. This will make sure you are consistent on the measurements.
>how can you live with yourself
Quite easily, thanks.
My great grandfather's H&R Auto-ejector in .32 S&W.
The last patent date on it is Aug. 1889, IIRC.
>There's another thread about ARs at this minute
>Side charging uppers
Anyone who likes those things is a moron.
That's what I've done in the past. Tested it by going 10 clicks high, 10 clicks low, been pretty good. Was checking for new hotness.
I was genuinely curious. You've always been nice and helpful to me on here. I just figured everyone was being dicks to you because /arg/ is kind of retarded. Thanks for clearing that up for me.
Doesn't know about spraying plasticizer over the paint.
Shiggy diggy dooo CG knows and you dont.
S m b T b h F a m
(HEH however im glad to help)
Link in a min i advise you wait for me to receive it and do a review which will be after mounting and zeroing. Then bump it around a little then check zero. Then QD remove and remount check zero QD remove and remount check zero. I will even bote whenever it leave mark on scope body which tell tale of misaligned rings.
Wandering zero is far fetched it as it has to to be steaming shit teir far worse than ncstar teir. My dad had utg one piece qd mount which he dremel to accept his big $200 dollar something tactical Bushnell scope he remove it twice and remount it held zero. He no longer use that scope and ring set up for he have burris eliminator laser scope now.
I only care about it holding zero while mounted and have QD ability for removing it ASAP if it get damaged. Not return to zero after remounting.
> implying you shouldnt always confirm zero after remounting any mount even if you have bobro or gdi mount.
>I just figured everyone was being dicks to you because /arg/ is kind of retarded.
Oh wow, in a scenario that involved other parties and CG, you thought it wasn't CG who was the retard?
whats that optic? and how do you like the blackhawk stock, i got one for 7 from PSA and it stuck pretty hard on a milspec tube, maybe they were just unloading blems or somthing touugh
lucid hd7. I like it so far.
I don't really like the blackhawk stock at all though. I'm waiting until black friday in hopes a good one will go on sale. Even if one doesn't, it's getting replaced either way. It wobbled like a motherfucker, so I put some tape on the buffer tube, and it doesn't really move around at all anymore.
Not really yet. I mean I've banged it against some stuff and lost some paint on one side, but I've gotten the thing really damn hot and haven't had much issue yet.
CG is by far the most retarded aspect of /ARG/. Like, it's not even close. Hate all the tripfagging or attention whoring all you like, CG does all that while also being the single most retarded user I've ever interacted with on this godforsaken hole of a website, and I stuck exclusively to /b/ my first couple years.
I got one of the blackhawk build kits minus the fcg because it was $5 more than the psa, and I was in the mindset of
>hey, it's a little more expensive, maybe it will be a little better
I should have just gotten the parts myself outside of a kit.
Forward Assists: are they necessary for a civilian HD/range toy build? All's I know is they help push the bcg back into battery
If anon was still confused why we know CG has immeasurable autism
1) That particular laser device looks like it would be blocked by having the sight in front, unlike a PEQ or something that's designed to work around a FSB
2) The irons are a backup, therefor they're a lower priority and having the absolute longest sight radius possible isn't as critical, especially since they're third in line when the laser's in use with NODs (Laser > Optic > Irons)
FOV of the optic is over the top of the CQBL, the laser being forward on the handguard means it will not be occluded by his hand/fingers when grasping the handguard, and the controls are easily reached.
The M&P15 Sport doesn't have a FA, but you can build a full-featured PSA build for around the same price or a little less nowadays, so there's no real reason to go with the Sport. Especially since they stopped putting the nice melonited barrels in them.
here's link. you are welcomed.
Thats sweet! Thanks.
Take a look, look like you strike somebody's nerve
His nerve -> >>27803523
Gr8 b8 m8 I actually graduated my HS with honor.
(Just now realized how none of my uni friends knows well thats better im generally humble type of guy)
You expected more from him? He unironically thinks CAI makes good stuff.
If he says something is good, avoid it.
t-12hrs until i can assemble my ar.
CAN YOU FEEL IT!
>implying there's a limit to CG tardation
Oops, t-24hrs not 12hrs. mailman usually comes around 5-6pm.
thanks, i feel as though i've improved a lot.
i pushed it back one notch after my rifle fell and hit light first. it's all good now
LWRC UCIW stock, receiver extension, spring, and buffer.
mask off things i don't want painted and then go to town on it.
Which Figma is that? Max Faggotry?
Trying to decided if I want to spend all my cash on a TA11 or a great upper (or both)
I mask optic lenses, sight posts/apetures, and any exposed turret markings. The rest I just spray assembled so I don't run into tolerance stacking with the paint between mated parts.
On something as light as an AR I'd recommend going TA33 instead of the TA11 as it is very bulky/heavy in comparison.
I meant the manufacturer, and yeah, it's in the file name, or reverse image search
I kinda want some poorfag state armory
That's what I thought. You like it pretty well? Thinking about one for a sbr build I'm gonna do on the pictured lower.
Do you happen to have a picture with it fully retracted compared to a non compact stock?
Got a little over excited while trimming down my hammer sear and now it will jump reset if you let off super slow... Anyone have experience with the generic nickel Teflon coated triggers from like PSA and the like? I think I may pick up a couple more hammers and try again though...
This is entirely accurate, as Goodsmile has a "figma" line. (pose-able weebshit)
For good measure here it is next to my least compact stock.
>Can't argue against the OP edition
Maybe I'll source an overpriced FSP cut RIS II to put on that 14.5 socom to join the club and jock your style.
no it's not. You're retarded.
you're retarded too.
GSC distributes max factory shit. Figma is one of their lines. You're not going to see a kaiyodo or kotobukiya figma.
How about you send me your upper with the rail on it. I'll send you the bravo socom 14.5 + moneys. You like building shit, I like spending money pointlessly and being lazy. Win/win dude.
it's max faggotry... faggot
figma is in fact japanese for pose-able weeb shit
Both Kaiyodo and Kotobukiya have articulated figures. Regardless of the fact that Max Factory articulated figures are their Figma line, the use of the term is universally understood to denote an articulated figure no matter the manufacturer.
You don't want a socom profile unless your desire to clone is overwhelming, just stick with a standard M4 profile.
>Both Kaiyodo and Kotobukiya have articulated figures
yes. but they don't have figmas. that was kind of my point.
>the use of the term is universally understood to denote an articulated figure no matter the manufacturer.
no it's not. mcfucking kill yourself and go back to /v/.
>unless your desire to clone is overwhelming
you obviously don't understand
What do you use as the filter/stencil to get that micro pattern? Almost has a carbon fiber texture look to it.
Yeah it would probably be a stupid trade on both ends, but always worth throwing it out there. How long did it take you to find one and what did it end up costing you? Really took a liking to the RIS II with that little mk18 upper I had for a few weeks.
Daniel Defense doesn't fully secure their taper pins if you order their FSP barrels so you lightly tap them out, install your barrel nut, then pound them in.
I would expect that to be a common practice, but I don't have experience with anyone else's offerings.
>no it's not. mcfucking kill yourself and go back to /v/.
>Being this fucking autistic
Yeah, I figure that out, I was looking at a different fig so I was dumb.
I kinda want a URX 3.1... Do I have the gay?
I have this trigger group and it works great for me. I'm not in the market for a fancy two-stage yet, but this one just feels like a super crisp 6 lb milspec trigger. Add some different springs and you could bring the pull down to 4lbs probably. Pretty good for $35.
So I have this sitting in my cart....
Do you own an ArmaLite brand ArmaLite Rifle 15 rollmarked and abbreviated as an AR-15?
I don't, but as far as everyone in this thread is concerned, its an AR-15.
Only one of theirs I can find is a 16" mid.
I want a 14.5" carbine. Plan on putting the MI Extended Carbine rail on it until I'm not poor.
Should I just go with a BCM M4 upper?
>Being this fucking autistic
>he said, posting in /arg/
>he said, posting in /arg/
Don't forget the tripcode
>The AR-15 was first built in 1959 by ArmaLite as a small arms rifle for the United States armed forces. Because of financial problems, ArmaLite sold the design to Colt. After some modifications, the redesigned rifle was adopted as the M16 rifle. In 1963, Colt started selling the semi-automatic version of the rifle for civilians as the Colt AR-15. Although the name "AR-15" remains a Colt registered trademark, variants of the firearm are made, modified, and sold under various names by multiple manufacturers.
but its black
and i'm going to make fun of you
If I hose it down with greens and browns it won't much matter. I found the FDE for 445-450. I was thinking about trading/selling that m4gery so I'm not sure I'm going to pull the proverbial trigger anyway.
is 24 oz of battery acid enough to anodize a lower? I've heard you should use a 50/50 mix of water to battery acid to get a 1/5 ratio of sulfuric acid to water. I just don't know how much liquid you really need to anodize something.
new thread >>27804693
new thread >>27804693
I call em metal clanky wheel boxes but whatever man. regardless... in the industry they are usually refereed to as figma regardless of the technical term.
I like KAC, but I think the fact that you need their supper special expensive barrel nut wrench is a kick to the nuts and not worth it.
>BHP is listing the KM1-A specifically as an upgrade for M300/M300B
Yeah, I know, but I'm kind of worried they made the head non-removable like QB says.
They don't list the V1 anymore, but the archive Google page shows that they had the "non-removable heads" warning under the product description.