[Boards: 3 / a / aco / adv / an / asp / b / biz / c / cgl / ck / cm / co / d / diy / e / fa / fit / g / gd / gif / h / hc / his / hm / hr / i / ic / int / jp / k / lgbt / lit / m / mlp / mu / n / news / o / out / p / po / pol / qa / qst / r / r9k / s / s4s / sci / soc / sp / t / tg / toy / trash / trv / tv / u / v / vg / vip /vp / vr / w / wg / wsg / wsr / x / y] [Home]
4chanarchives logo
Archived threads in /toy/ - Toys - 48. page
Images are sometimes not shown due to bandwidth/network issues. Refreshing the page usually helps.

File: IMG_20160813_113413.jpg (2 MB, 2448x3264) Image search: [iqdb] [SauceNao] [Google]
2 MB,
I recently bought a Mafex Batman, it's fantastic so far, but yesterday I posed him crouching, but now his left thigh has become stuck somehow?

The joint won't move atall, anyone had the same problem? How do I loosen it?
12 replies and 7 images submitted. Click here to view.
Hair dryer, hot water, use heat to soften the figure

I don't see how its stuck, you mean the balljoint that attaches the thigh to the pelvis?
I don't see how it's stuck either :(. Yes it's the balljoint, the thigh can't be brought up, only do the splits.

I don't think I have a hair dryer handy at the moment, do I run the joint under a hot tap?

Thanks for baring with me, I know I suck at explaining things.
I've used some dish washer soap, and it's now movable!!

Will the hairdryer be a more permanent solution? At least we've now solved it was just a really tight joint!

File: CpuaGB8UsAAQJ7t.jpg (187 KB, 1200x675) Image search: [iqdb] [SauceNao] [Google]
187 KB,
1/72 A.I.S.
10 replies and 6 images submitted. Click here to view.
File: Cpue0cmVYAASw5h.jpg (113 KB, 720x1280) Image search: [iqdb] [SauceNao] [Google]
113 KB, 720x1280
File: CpudoYkUEAAln0G.jpg (128 KB, 1200x675) Image search: [iqdb] [SauceNao] [Google]
128 KB, 1200x675
i always thought the AIS should get a model kit.

File: Endless Fun.png (136 KB, 730x663) Image search: [iqdb] [SauceNao] [Google]
Endless Fun.png
136 KB,
Welcome to LEGO General, enjoy your stay!

Previous Lego General → >>5846965
Dieonicle and CCBS General → >>5851526

Some sort of FAQ: https://docs.google.com/document/d/1YVt-4sibEMFOU8H484MpB-K6rNla5SIYdHZG8lyCHLQ/edit?usp=sharing

Monthly Building Challenge:
Your challenge this month is to create a /pol/-inspired MOC depicting whatever atrocities/happenings August brings.
471 replies and 151 images submitted. Click here to view.
File: IMG_13032.jpg (254 KB, 1600x1200) Image search: [iqdb] [SauceNao] [Google]
254 KB, 1600x1200
File: ragnaros.jpg (463 KB, 1426x803) Image search: [iqdb] [SauceNao] [Google]
463 KB, 1426x803
i think this is a good start
File: 944x531.jpg (192 KB, 944x531) Image search: [iqdb] [SauceNao] [Google]
192 KB, 944x531
Working on a landcarrier https://youtu.be/eK_gcarytzs

File: TOY10645.jpg (44 KB, 752x564) Image search: [iqdb] [SauceNao] [Google]
44 KB,
Is anyone here getting the new Toynami Voltron over the new Soul of Chogokin version? I like the classic look of the SOC better but the Toynami version looks like it has great articulation. So far the SOC has only been shown in very limited poses.
6 replies and 1 images submitted. Click here to view.
Please someone do a downsized KO of the Ultimate EX
You seen the price for that thing Anon? It's bordering on FARCICAL!
I really love the styling of this thing but it's just way too big and way too expensive for what it is. Would love to have this at half the size for half the cost.

File: 20160812_222924.jpg (3 MB, 4032x3024) Image search: [iqdb] [SauceNao] [Google]
3 MB,
Anyone else have one of these? I know it is statueshit, but still
8 replies and 1 images submitted. Click here to view.
Where the hell did you get that?
>I know it is statueshit

So why the fuck are you posting it here?
Looking at that atrocious paint job, I imagine OP made it himself and wants to show off.

File: sobbing mathematically.jpg (32 KB, 680x396) Image search: [iqdb] [SauceNao] [Google]
sobbing mathematically.jpg
32 KB,
>that thing you bought thinking it would go up in price sooner is still MSRP or on clearance
>that thing you didn't buy thinking you still had plenty of time is two to four times more expensive now

What is its name /toy/?
The name of that toy that you thought you had plenty of time to buy, it wasn't even a year old, maybe not even six months old, but next time you checked the price on it, it was going for more than you were willing to pay?
This hobby is 100% bullshit.
21 replies and 4 images submitted. Click here to view.
File: shfigTHENINJA1.jpg (67 KB, 409x539) Image search: [iqdb] [SauceNao] [Google]
67 KB, 409x539
>figures pretty much had been shelfwarming
>figured I could get him later like the others
>PO sold out
>going for scalper prices
this was bullshit anyway, why in God's name did they make the fucking ninja exclusive?
>didn't even wrestle in a wrestling manga
>literally two fights in the original series

File: love-hate-relationship[1].jpg (506 KB, 850x565) Image search: [iqdb] [SauceNao] [Google]
506 KB,
Survey time!

>top 3 toylines
>top 3 worst toylines

Try to be specific. If you're mentioning a toylineswith several franchises like figma or something, then specify the franchise too.
137 replies and 22 images submitted. Click here to view.
File: 1452941262479.jpg (469 KB, 1000x1554) Image search: [iqdb] [SauceNao] [Google]
469 KB, 1000x1554
>Figuarts, S.I.C. and Four Horsemen i suppose, i don't think those lines are the best ever but they're just the ones i have the most from.
>Play Arts Kai, Marvel Legends and Daibadi, they're the only lines that have actually burned me on a purchase i've made from them to the point where i don't bother buying them anymore.
Transformers G1 MP, S.H.Figuarts DBZ, S.H.Figuarts Kinnikuman (I also like high end super robots figures like STN Getters, SOC GGG and such but nothing forming a unified toyline)
Anything Gundam, anything Star Wars, non MP Transformers released after HFTD/RTS
File: 1468977623423.webm (2 MB, 1280x720) Image search: [iqdb] [SauceNao] [Google]
2 MB, 1280x720
>SH Figuarts, Figma, Gunpla
>REVOLTECH, Black Series, Funko

>pleb status

File: 1470446618547.jpg (719 KB, 1500x1110) Image search: [iqdb] [SauceNao] [Google]
719 KB,
Does anyone else tend to buy things when they're depressed? I buy things when I'm not feeling bad and enjoy them, of course, but this month has been bad for me and I spent about $500 on random stuff i didn't need or enjoy that much.

how do i break out of this behavior?
24 replies and 7 images submitted. Click here to view.
>how do i break out of this behavior

You cure depression.

Until then welcome to hell i'm there with you (Spent only $350 myself, still bad with my income)
believe it or not exercise does wonders for depression, you could always go out and jog - if you have a dog its way better, put on some tunes and get out there and sweat that bitch out.
Also, get a hobby - go to an arts course (painting, creative writing, music), anything that gets you out of the house.
If you are not seeing anyone, try and go out, lower your standards if you are a wizard / on your way to be a wizard. Yeah, i know they say you can fuck up a person if you're depressed but sometimes the other...
Comment too long. Click here to view the full text.
Nah I eat when I'm depressed.

File: Heh.png (807 KB, 720x540) Image search: [iqdb] [SauceNao] [Google]
807 KB,
HOly shit
64 replies and 11 images submitted. Click here to view.
Nigga, you jackin...
Would never happen.
Not "confirmed" confirmed, but here's what we know from social media:

"Yes we're at #morphicon this weekend! Come check out the definitive version of _________! #powerrangers"

Bluefin's Facebook:
"SURPRISE! We're going to unveil something at The Official Power Morphicon Convention ! Come check out the show to find out more!"

>G1 Story Material

>G2 Story Material

>For builders:

Comment too long. Click here to view the full text.
622 replies and 126 images submitted. Click here to view.
>fedex said package was coming yesterday
>said package was coming today
>now says pending with no scheduled delivery
>apparently fedex gave it to a third party also who could have taken my package and left to antarctica for all I know
>therefore cant track it anymore
>no idea if its coming to my house or post office or they sent it...
Comment too long. Click here to view the full text.
maskmaker anon with some news - I've found a new type of plastic which will likely work very nicely. However, pic related -- I'm may have to buy a proper gas mask (like the kind painters use). Gonna set me back another $30. There's always something else...
Post some mocs

File: 1470794856-uw-victorion.jpg (47 KB, 508x697) Image search: [iqdb] [SauceNao] [Google]
47 KB,
Will we get another character reveal tonight? Onslaught maybe? Who knows? Who cares?

Old thread >>5849455
411 replies and 103 images submitted. Click here to view.
Central cali walmart here with tr wave 1

No legends or voyagers but all the deluxes, getting skullcruncher

The designs of these guys seem so big in pics that i was a bit surprised when i saw them at actual deluxe size in person

Also scourge looks much better in person, blurr is still bad, going takara for both
I wanna say that they're bigger deluxes than we've had in awhile.
Pre foc I believe.
Skullcrunchers green is fucking beautiful, the hot pink is as garish as it should be and i dig it

Really not digging the face sadly.

Never handled a toy whos parts are so desperate to pop off as well. Still, articulation is there and gator mode looks banging.

Initially i really wanted this guy the most, but i think he may end up getting replaced by crox. I wasnt a fan of croxs hands and chest, so asthetically tr is better imo but crox seems way more solid

File: Dragon_Ball_Z_Legacy.png (197 KB, 2048x632) Image search: [iqdb] [SauceNao] [Google]
197 KB,
BanDai America recent release of their Power Rangers line had me thinking that DBZ could be another line they should make. DBZ is about to celebrate the 20th anniversary of its first US airing and BanDai should be capitalizing on this. DBZ Kai is still airing and soon unfortunately Super will probably hit US TV. Sure SHF are already out there, but honestly the aftermarket prices are horrible and some you have to get a well connected Japanese friend to snag an online exclusive. Do you guys think there's enough interest in such a line? I mean there's a market for $25...
Comment too long. Click here to view the full text.
24 replies and 2 images submitted. Click here to view.
You'll just get a bunch if elitist stalking about how they'd never touch a filthy subhuman American figure
yup >>5851244

File: Funko LoL Zed and Fiora.png (2 MB, 1436x600) Image search: [iqdb] [SauceNao] [Google]
Funko LoL Zed and Fiora.png
2 MB,
These LoL figures are produced by Funko.
I would advise against pre-ordering them due to the lack of quality in Funko's past lines.

It's also good to note that on the product page that Funko is not listed as the manufacturer. I had emailed Riot support to find out.


Every other (non Pop!) Funko figure has been discounted on amazon by nearly 50% due to how crap they are.
13 replies and 3 images submitted. Click here to view.
Ah... are you sure? That's kind of scary. I actually got some of the first wave of the GoT figures and they were all fairly solid but felt fragile, but now their newer stuff with Fallout and Skyrim looks pretty bad. I was going to get the two of them and Yasuo so shipping wouldn't hurt so much. I guess I'll continue to wait for some actual images of the product. I wonder why they'd go with Funko of all companies.

You can email support to find out. I'd guess they are the manufacturer because of a low bid or because they are just skins instead of the normal characters.
Yasuo will be fine as he is produced by Goodsmile.

Anyone ever pay for a bootleg to avoid rape pricing?

I was considering getting this PAKs bootleg to avoid paying over $100 and to make sure I don't support Square Enix
6 replies and 1 images submitted. Click here to view.
>dragon quest PAKs never
>to make sure I don't support Square Enix

What's it like being this autistic?

Like I'll never be happy with my life

File: 14994071986_92827e964d_b[1].jpg (109 KB, 1024x680) Image search: [iqdb] [SauceNao] [Google]
109 KB,
>someone receives a new toy and wants to review it or simply take a few pictures of it in action
>Iron Man pose every fucking time

>someone receives a new toy with articulated fingers
>flipping the bird or rock signs pics 100% guaranteed

>Transformers review
>guy didn't memorize the transformation

>toy review
Comment too long. Click here to view the full text.
99 replies and 6 images submitted. Click here to view.

>Toy reviewers with shitty opening themes with stupid graphics

>Toy reviewers with stupid skits that they think is funny

>Bicep curl arms

>collectors who take themselves way way waaaaaay too seriously

>Elitist collectors who think they are better than everyone else

>Collectors who shit on you for liking something...
Comment too long. Click here to view the full text.
Sounds like you got a barbed stick up your ass.
>con exclusive, especially SDCC shit that more often than not should just be a re-release of an existing figure
>people actually trying to justify anything being a con exclusive

Fucking shitters ruining an entire hobby. Want a more accurate Broly figure? Eat shit, better live in some shithole in Cali or you'll never see it for a decent price.

Want a decent TM2 Megatron, something people have been pining for for years? Fuck you, $800 con...
Comment too long. Click here to view the full text.

File: photostudio_1454290839529.jpg (219 KB, 683x1024) Image search: [iqdb] [SauceNao] [Google]
219 KB,
Anyone here ever consider consolidating their collection and just displaying a few pieces at a time or do just that? I recently bought my first 1/4 scale figure and now I feel like I own way too much cheap shit. I don't want to get rid of it, but I feel like it just looks tacky and I would put it in storage.

32 replies and 3 images submitted. Click here to view.
>just displaying a few pieces at a time
That's called the Autism Divide.

Autists (i.e. people that collect Marvel Legends, Transformers, and Waifu toys) don't understand that putting all 350 of their toys out on every surface of their living space is a sign of mental illness. In a proper society, doing such would lead to forced sterilization or outright castration of the autist for the good of us all. Instead, we just mock them.
I have a system.
depending on what im putting up will depend on how many will be in the space
>3,4, or 5 if its small (1/12 or whatever)
>1 or 2 if its medium sized (hot toys)
>one a single big guy (larger hot toys or 3A stuff)
>I don't want to get rid of it, but I feel like it just looks tacky and I would put it in storage.
I do that all the time. Don't know why you'd want to display everything you own in the first place. Not only does it give your figures room to breathe but it also gives you an incentive to cycle through your figures on display depending on your mood.

File: 046.jpg (493 KB, 800x1200) Image search: [iqdb] [SauceNao] [Google]
493 KB,
Is this a good figure /toy? This has been the only DMC figure that really appealed to me but I'm put off by the face and sideways cape
38 replies and 3 images submitted. Click here to view.
The one I have has purple lips for some reason, but other than that its very average, his jacket stuck in place like that is annoying too.
Face is a bit bleh and the heavy coat will bend his legs over time, also my arms and hands are constantly popping off, even as a NECA fan I can't really recommend him.
It's the best Dante we have so far, but that's not saying much. See >>5849875 mine also have purple lips. The face sculpt is atrocious and doesn't look anything like Dante, except for maybe DMC2 edgelord silent meth addict baggy eyed Dante. Articulation wise it's also meh, he cannot dualhand Alastor, and Alastor is a bit too small for his figure. Also the cape is too heavy, causing the knee joints to warp

File: insanely well done Type 94.jpg (1 MB, 1110x1600) Image search: [iqdb] [SauceNao] [Google]
insanely well done Type 94.jpg
1 MB,
For those unfamiliar, "Plamo" is a shortened form of "plastic model." If it's made of plastic, someone can probably help you here.

>"If you're new, you're gonna fuck up. Don't worry! If you're experienced, don't make the new people worry!"


IRC Channel

The guide:

Comment too long. Click here to view the full text.
376 replies and 95 images submitted. Click here to view.

***GM Group Build***
Pick an HG GM, and paint and customize it. For it to count as a GM, it literally just has to have GM in the name of the MS on the box, otherwise, no, it doesn't count. As far as customizing it, I'm going to place a limit on that. The limit is 50% additions to the kit.
To define 50%, look at it like this, you could take a GM Custom and replace the arms (including shoulders), legs, and backpack and I'd call that 50%. I'm not counting handheld bits in that. If you're unsure of something please...
Comment too long. Click here to view the full text.
File: TOY-RBT-4056_03.jpg (121 KB, 800x800) Image search: [iqdb] [SauceNao] [Google]
121 KB, 800x800
first for SOON
File: IMG_7243.jpg (570 KB, 1600x1200) Image search: [iqdb] [SauceNao] [Google]
570 KB, 1600x1200
Finally have time to work on my PG unicorn.
removed the ball joints for the verniers and cut holes to accept IC sockets. The hole in the verniers was a little too big to take the 3mm led directly, but a piece of styrene tubing made them fit perfectly.
I'll be gluing the IC sockets in place with some UV curing glue later.

File: figma general OP Vividread.jpg (524 KB, 2001x1318) Image search: [iqdb] [SauceNao] [Google]
figma general OP Vividread.jpg
524 KB,
Previous Thread >>5837007

Toyline general info:

Max Factory figma list & blog

Reviews and news about GSC/MF products by Kahotan

Where to buy
>GSC Online Shop - some figmas only are available through their online shop
>Amiami - usual place for buying, to some people, shipping is a bit higher due to packaging
>Hobby Link Japan shipping is usual lower, but their prices are a bit higher, private warehaouse is available
>Hobby Search Japan - items stay in stock the longest
>Mandarake - search figma or フィグマ
>eBay/Amazon - only if you hate having too much money. Avoid bootlegs, you can spot them as 'Chinese version'
>http://jungle-scs.co.jp/ - Seems like you can fine some good deals here
>Check the BST threads, My Figure Collection for any offer/deal

Here's a link to the buyfag guide list of shops:
If you're getting into the hobby, there's plenty of other useful information to find on the wiki.

In case someone is interested in the printable backdrops/dioramas & other papercraft stuff that Max Factory have in the download section of their site:
here is a back up, Enjoy!

Short illustrated posing guide by Max Factory
>http://ameblo.jp/figma/entry-11564427757.html (in moonrunes)
The S shape is always good advice though. The basic idea is that straight lines tend to look stiff.

Do you have problems swapping part in your figures? check this little advice

Figma Firearm Database

Tomytec's 1 inch scale section (1/12 stuff, little armory, vehicles and others)
350 replies and 86 images submitted. Click here to view.
>Release schedule:

>Kazuma Kiryu (Delayed from June to August)
>Nozomi Tojo
>Link: A Link Between Worlds ver.
>Link: A Link Between Worlds ver. - DX Edition
>Sakura Kinomoto: Battle Costume ver.
>Kirito: ALO Ver.
>Lucina (Rerelease)
>The Thinker (Rerelease)
Comment too long. Click here to view the full text.
File: BMG.jpg (74 KB, 488x600) Image search: [iqdb] [SauceNao] [Google]
74 KB, 488x600
I caved.
Updated checklist of prototypes and planned releases
Also, check the figma related announcements on the GSC/MF Wonfes site:

Toys only you had
54 replies and 18 images submitted. Click here to view.
Not a snowflake with those bk backstreet boys
File: 1470696358496.jpg (58 KB, 620x451) Image search: [iqdb] [SauceNao] [Google]
58 KB, 620x451
Fuck. I got that blue guy in the middle. The fuck were they for?
burger king backstreet boys. If I recall, one of them came with this stasis pod/coffin thing that I used for my other figures.

File: reissue when.jpg (72 KB, 300x533) Image search: [iqdb] [SauceNao] [Google]
reissue when.jpg
72 KB,
Okay, so I have been waiting for a decent figure of Superman and the DC Icons line caught my attention when they released the figure art for it but the eyes and paint applications was terrible according to critics.

Is there a possible re-issue in the future or am I gonna have to hire a custom painter to make it better?
37 replies and 11 images submitted. Click here to view.
Looks fine in the picture there op....
Define "fine"
Stoner superman seems like a weird concept for a toy

File: pbec_header_h1.png (15 KB, 515x54) Image search: [iqdb] [SauceNao] [Google]
15 KB,

So this is apparently happening. P-Bandai officially partnering with Buyee, From Japan, and other pages. Has anyone used this yet? Is it limited in the items buyable, or is it a free-for all on pre-orders?
8 replies and 1 images submitted. Click here to view.
I dunno why the hell they'd do this, it's not like they don't have the resources to ship internationally. Unless they just want some extra cash from the partnership.
The list of items that can be purchased through this partnership right now is...basically nothing. If this doesn't work with new items that are on the webshop then there's really no point to this.
Probably to get around bullshit distribution license fees.

Are these as hard as they're made out to be?
10 replies and 4 images submitted. Click here to view.
Nah, dude. They even come with instructions for a basic method of solving it. The hard part is solving it fast, but most people are impressed no matter how quick you get it done. You should spend an afternoon learning it some day. Makes for a neat party trick.
To "solve" them through guesswork, sure. But you're not supposed to "solve" them like that, there's a specific set of moves you're supposed to follow to do them.
Depends on the level of proficiency you want. My little brother likes to speed-solve (I believe his fastest time is around 8 seconds for a 3x3 cube). You can reasonably learn the basic algorithms in just a couple hours, but to then learn quicker methods and gain speed takes a lot of practice. Companies out there make special cubes that are engineered for speed, too. But for a basic solve, it's not horribly difficult.

File: one_piece_burning_blood.jpg (135 KB, 854x480) Image search: [iqdb] [SauceNao] [Google]
135 KB,
Are there any decent One Piece figures?
27 replies and 13 images submitted. Click here to view.
Variable Action Heroes for articulated, later POPs for statues. S.H Figuarts are and always were garbage, anyone who tells you otherwise is wrong.

If you don't like the VAHs though (which many don't. I personally find them hit and miss) then it's either statues or nothing. I dig my Sabo figure but the Mihawk didn't look very good to me, so I skipped it. Not sure how I feel about Hancock either, it didn't look as good as I'd hoped.
File: DSC_0961.jpg (578 KB, 895x1000) Image search: [iqdb] [SauceNao] [Google]
578 KB, 895x1000
File: 20150629_192845.jpg (935 KB, 2340x4160) Image search: [iqdb] [SauceNao] [Google]
935 KB, 2340x4160
And yes.

File: flerb.png (1 MB, 1132x942) Image search: [iqdb] [SauceNao] [Google]
1 MB,
Revo Big Boss or Figma Solid Snake?
83 replies and 26 images submitted. Click here to view.
File: s1yWCaE.jpg (786 KB, 1836x3264) Image search: [iqdb] [SauceNao] [Google]
786 KB, 1836x3264
I'd say neither.
What Dio is that

File: horse.0.jpg (60 KB, 800x533) Image search: [iqdb] [SauceNao] [Google]
60 KB,
Anyone know of any articulated 1/12 scale horses? I'd like some to go with some marvel legends/figuarts figures.
17 replies and 7 images submitted. Click here to view.
File: horse.jpg (91 KB, 600x600) Image search: [iqdb] [SauceNao] [Google]
91 KB, 600x600
For Figuarts the revoltech Jizai Okimono Horse sort of works. It's a little small but the quality of the figure is really high.

Figma Horse sucks and is the same size so really no reason to get it unless you like the looks better.

MOTUC Arrow is a nice size but the color scheme is not ideal.
File: DSC00201.jpg (2 MB, 3647x1996) Image search: [iqdb] [SauceNao] [Google]
2 MB, 3647x1996

Figma Horse. Come in white & chestnut

Kinda small for Berserk but the Deluxe Rider Lord of the Rings ones work fine with it
File: TripleD1464232284.jpg (87 KB, 600x800) Image search: [iqdb] [SauceNao] [Google]
87 KB, 600x800
Revo horse best horse.

File: 1470640797423.jpg (326 KB, 505x960) Image search: [iqdb] [SauceNao] [Google]
326 KB,
What would this classify as
23 replies and 3 images submitted. Click here to view.
File: 1470640325522.jpg (281 KB, 1081x1920) Image search: [iqdb] [SauceNao] [Google]
281 KB, 1081x1920
Another and i want more pics if you have any
How can something combine so many things at once?Got from /trash/ or /b/
Can't remember

File: TOY-RBT-4056.jpg (93 KB, 600x600) Image search: [iqdb] [SauceNao] [Google]
93 KB,
>robot that transforms into wheels

shit my weakness
17 replies and 3 images submitted. Click here to view.
Isn't this a mode kit?
yeah. by koto too so expect parts popping off like a firecracker
Your dick might explode if you play Xenoblade Chronicles X then.

File: Rusty_Brown_1.jpg (192 KB, 1045x487) Image search: [iqdb] [SauceNao] [Google]
192 KB,
Anyone know the name of a web comic about a guy and his friend who get into buying toys and selling them at conventions?
34 replies and 5 images submitted. Click here to view.
No not really, i don't think a comic like that is out there.
>Anyone know the name of a web comic about a guy and his friend who get into buying toys and selling them at conventions?

I remember this thread. good times. we had this last year, right?

File: thiscouldbeFrank.png (1 MB, 1074x1015) Image search: [iqdb] [SauceNao] [Google]
1 MB,
389 replies and 94 images submitted. Click here to view.
File: 1469772271646.jpg (1 MB, 2323x1718) Image search: [iqdb] [SauceNao] [Google]
1 MB, 2323x1718
Big Franks to the Frank that Franks this Frank
Chart anon here, I still need to update it. Saw all the mistakes people pointed out in the last two threads.
>that pic
I know we had an Iron Patriot Legends figure relatively recently in the 2013 Iron Monger wave but I'd really appreciate a newer one on a more improved body mold.

Wish we got a new one in the Abomination wave rather than Iron Skull honestly.

Pages: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183]
Pages: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183]

[Boards: 3 / a / aco / adv / an / asp / b / biz / c / cgl / ck / cm / co / d / diy / e / fa / fit / g / gd / gif / h / hc / his / hm / hr / i / ic / int / jp / k / lgbt / lit / m / mlp / mu / n / news / o / out / p / po / pol / qa / qst / r / r9k / s / s4s / sci / soc / sp / t / tg / toy / trash / trv / tv / u / v / vg / vip /vp / vr / w / wg / wsg / wsr / x / y] [Home]
[Boards: 3 / a / aco / adv / an / asp / b / biz / c / cgl / ck / cm / co / d / diy / e / fa / fit / g / gd / gif / h / hc / his / hm / hr / i / ic / int / jp / k / lgbt / lit / m / mlp / mu / n / news / o / out / p / po / pol / qa / qst / r / r9k / s / s4s / sci / soc / sp / t / tg / toy / trash / trv / tv / u / v / vg / vip /vp / vr / w / wg / wsg / wsr / x / y] [Home]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.
This is a 4chan archive - all of the content originated from them. If you need IP information for a Poster - you need to contact them. This website shows only archived content.
If a post contains personal/copyrighted/illegal content you can contact me at wtabusse@gmail.com with that post and thread number and it will be removed as soon as possible.